How to avoid humidity problem from Resin Artworks during Monsoon?

Why is humidity a problem for resin artworks?

Resin artworks are vulnerable to humidity due to the nature of the material. Resin is a type of polymer that cures and hardens when exposed to air. However, high humidity levels can interfere with this process and lead to various issues such as cloudiness, tackiness, or even complete failure of the artwork.

1. Choose the right environment

When working with resin during the monsoon season, it is crucial to select a suitable workspace. Ideally, the room should have a controlled temperature and humidity level. Avoid areas with excessive moisture, such as basements or rooms without proper ventilation.

2. Use a dehumidifier

To combat high humidity levels, consider investing in a dehumidifier for your workspace. This device helps remove excess moisture from the air, creating a more stable environment for resin curing. Run the dehumidifier while working on your resin artworks to minimize the risk of humidity-related problems.

3. Seal your workspace

Sealing your workspace can help prevent outside moisture from affecting your resin artworks. Close windows and doors tightly to minimize the entry of humid air. Additionally, check for any cracks or gaps in the walls or ceiling and seal them properly.

4. Use a moisture barrier

Consider using a moisture barrier, such as plastic sheeting or a tarp, to cover your workspace surfaces. This extra layer of protection can help prevent moisture from seeping into your resin artworks during the monsoon season.

5. Monitor humidity levels

Regularly monitor the humidity levels in your workspace using a hygrometer. Aim for a humidity range of 40-50% for optimal resin curing. If the humidity exceeds this range, take necessary steps to reduce it, such as adjusting the dehumidifier settings or using additional moisture-absorbing materials.
Get Humidity Meter From Here

6. Allow for proper curing time

During the monsoon season, resin artworks may take longer to cure due to increased humidity. Be patient and allow sufficient curing time as recommended by the resin manufacturer. Rushing the process can lead to compromised results.

7. Store finished artworks properly

Once your resin artworks have cured, it is essential to store them in a controlled environment. Choose a dry area with stable humidity levels to prevent any post-curing issues. Avoid displaying or storing them in areas prone to moisture, such as bathrooms or near windows.


By following these tips, you can minimize the impact of humidity on your resin artworks during the monsoon season. Creating a suitable workspace, using a dehumidifier, and taking preventive measures will help ensure successful and long-lasting resin creations.

To address monsoon challenges, first we need to check the humidity of our work area with humidity meter. Get Humidity Meter from here
The humidity meter helps in monitoring and controlling the humidity levels in the working area.
Resin artist have to maintain the humidity below 80% for any resin. If your work area have more humidity than 80% , you can control it by using any of these below listed methods.

- Use a dehumidifier or air conditioner ( AC) to reduce humidity in the workspace.

-Use a heater to maintain the temperature of work place

- Install a halogen light in your work area, as it also help in absorbing moisture.
-Ensure closed space , which prevent outside moisture to come in your workspace
-Use a heat gun or a torch to carefully remove any moisture on the resin's surface. ( works for fast cure resin)
-Create a DIY humidity-controlled environment using an airtight container and keep bowls of rock salt for moisture absorption. ( work for small projects)

By implementing these precautions and utilizing a humidity meter, resin artists can overcome the challenges posed by the monsoon season and achieve successful resin curing results.