How to solve issues you face in Resin Artworks during Monsoon?
  • What are the common issues faced in resin artworks during monsoon?

    Resin artworks are a popular form of art that requires careful attention to detail and specific environmental conditions. During the monsoon season, artists often face several challenges that can affect the quality and outcome of their resin artworks. Some common issues include:

    • High humidity levels
    • Moisture absorption
    • Extended curing time
    • Bubbles and imperfections

    How can you combat high humidity levels?

    High humidity levels can negatively impact resin artworks by causing the resin to cure slower and potentially affecting the clarity of the final piece. To combat this issue, it is recommended to:

    • Work in a well-ventilated area
    • Use a dehumidifier or air conditioner to control humidity
    • Seal the workspace to minimize moisture ingress

    What can you do to prevent moisture absorption?

    Resin is prone to absorbing moisture from the surrounding environment, which can lead to cloudiness or discolouration in the artwork. To prevent moisture absorption, consider the following tips:

    • Store resin and materials in a dry environment
    • Use a moisture barrier such as a plastic cover or container
    • Avoid working in areas with high moisture levels

    How to deal with extended curing time?

    Resin artworks may take longer to cure during the monsoon season due to the increased humidity. To manage extended curing time, you can:

    • Extend the curing time as per the resin manufacturer's instructions
    • Use a heat gun or torch to accelerate the curing process
    • Allow the artwork to cure in a controlled environment with low humidity

    What are some tips to avoid bubbles and imperfections?

    Bubbles and imperfections can mar the beauty of resin artworks. Here are some tips to minimize these issues:

    • Use a heat gun or torch to remove bubbles before the resin sets
    • Ensure proper mixing of resin and hardener to avoid air entrapment
    • Work in thin layers to allow trapped air to escape
    • Use a resin with a longer working time to allow for better bubble removal

    By following these tips, you can overcome the challenges faced during monsoon and create stunning resin artworks with ease. Remember to always prioritize safety and follow the instructions provided by the resin manufacturer.

    Monsoon poses significant challenges for resin artists, impacting the resin curing process. Here are some common issues faced during this season:

    -Formation of foggy or oily layer on top of the resin.
    -Resin becoming sticky and difficult to work with.
    -Resin becoming bendy or flexible instead of curing to a solid state.
    -Uncured resin, where the intended hardening process does not take place.
    -Resin taking longer than usual to cure completely.

    These issues arise due to the influence of external factors on the resin curing process, particularly temperature and humidity. High humidity levels during the monsoon season can effect because-

    -Moisture present in the air reacts with the resin, resulting in the formation of a foggy layer on the resin's surface.
    -The resin's top layer may become sticky due to the moisture content in the surrounding environment.


  • To know more about the reasons and solution of sticky and bendy resin do check our video here